|
Description:
Brad-David Distributors’ Black Streak Cleaner
is designed to effortlessly tough black streaks, clean grease, grime, oil,
stains, bugs, mildew and more. It is non-abrasive, non-flammable and
biodegradable. Black Streak Cleaner is safe for fiberglass, painted aluminum
surfaces and decals. It is easy to use -- just spray on, let it set for a few
minutes and rinse it off.
Special Features:
•
Low foaming action
•
Use in pressure washers and steam cleaning
equipment
•
Non-abrasive and non-flammable
•
Biodegradable
Applications:
• Floors
• Walls
• Most
non-porous surfaces
Packaging:
2-liter
bottle
6 bottles
per case
Each 2-liter
bottle yields 35 ready-to-use gallons
General Use Directions:
Refer to
ready-to-use MSDS for personal protective equipment (PPE) recommendations.
Dispenser into a properly labeled container or mop bucket.
1. Apply the
cleaner with a trigger spray dispenser
2. Scrub and
dry the surface with a hand pad, cloth or sponge.
3. For
floors, cleaner may be used with a mop and bucket or auto scrubber.
4. Sweep or
dust mop the floor.
5. Properly
locate caution signs for wet floor conditions.
6. For light
soil, damp mop the floor and allow it to dry.
7. For
embedded soil, scrub using a swing machine or auto scrubber equipped with the
appropriate 3M™ floor pad.
8. If not
using an auto scrubber, pick up dirty solution with a wet vacuum or mop.
9. Damp mop
with clean solution and let dry. No rinse is required.
Product Specifications:
(Typical Values)
Concentrate:
1. pH: 6-7.5
2. Flash
Point: 102°F
3.
Solubility in Water: Complete
4. Specific
Gravity: 1.0
5.
Viscosity: <100 cps
6.
Appearance: Bright, clear liquid
Ready-to-Use:
1. pH:
7.5-8.5
2. Flash
Point: N/A
3.
Solubility in Water: Complete
4. Specific
Gravity: 1.0
5.
Viscosity: <100 cps
6.
Appearance: Clear, liquid
|